POS-156Z

 15.6“ POS AIO Terminal 

  •  15.6“ AIO terminals designed for POS and other industrial control 
  •  Robust slim display made of tempered glass 
  •  Motherboard is installed on the bottom fanless-design PC box. High-quality electronics industrial components for absolute reliability 
  •  Robust dual die-cast arms interconnect the panel with the PC box 
  •  Panel can be fully folded with the PC box to minimize the packaging volume 
  •  Support several Intel CPU platforms, Celeron, i3-Core and i5-Core 
  •  Clear and bright touch display, intuitive to operate. Full functionality even with wet fingers or latex gloves 
  •  Second display can be installed between the two robust arms 
  •  With USB-C ports on the hinge cover for easy service support function 
  •  With removeable SSD cover for easy replacement of the NVMe SSD 
  •  Can be equipped with optional magstripe reader, RFID reader, 32-key keypad and fingerprint reader
Request
Model POS-156Z-S64 POS-156Z-SI3 POS-156Z-SI5
CPU Intel® Celeron® Processor J6412 Intel® i3-1115G4 Intel® i5-1135G7
Frequency Up to 2.6GHz Up to 4.1GHz Up to 4.2GHz
Technology Support DDR4 3200MHz, 1*non-ECC SO-DIMM Slot
Max. Capacity Up to 32GB
Controller Intel HD Graphics Intel UHD Graphics Intel Iris Xe Graphics
Graphic Memory Shared System Memory up to 1.7GB SDRAM
Main Display Resolution 15,6“ (1366 x 768), ratio 5:4
Touch Panel PCAP, USB protocol
Second Display 1 HDMI (Type-A) up to 4096×2160
Second Display 2 N/A DP++ Port: up to 4096×2160@60Hz
Controller Realtek GBE LAN Chip (RJ45, 10/100/1000 Mbps)
Storage Primary SATA III SSD 120GB (Default), with SSD cover, easily replaced
Storage Secondary M.2 (NGFF) Key-B/B+M Slot

(SATA SSD, 2242/2260/2280)

 M.2 (NGFF) Key-M Slot (PCIe x4 NVMe SSD, 2242/2280)
Main USB 4 x USB-A 3.0; 2 x USB-A 2.0
USB Second Display USB-C (inside the bottom hinge cover)
Service Support USB-C (inside the bottom hinge cover)
Audio Line-Out + MIC 2in1 3.5mm Jack
Serial
1+1 DB9 COM
​VGA (Optional) Optional: DB15 VGA with built-in 12V power (replacing 1 x DB9)
​Powered USB (Optional) Optional: 1 x USB 12V; 1 x USB 24V (replacing 1 x DB9)
​Side MSR / Keypad With optional 24-key programmable keypad / Magstripe reader / RFID reader / Fingerprint reader
Power Adaptor Input Universal AC 100~240V, 50/60 Hz
Power Adaptor Output DC +12V 5A
​Storage Temperature -15°C ~ 55°C
Operating Temperature -0°C ~ 40°C
​Operating Humidity 10% ~ 85%
​Mounting Zig-Zag ARMs mounted on the PC-box
Datasheet

Media